Seed - KITE Grow Your Skills

Great pilots were first great ground handlers. Learn to kite, grow your skills.

paraglider Seed - KITE <em>Grow Your Skills</em> Bruce Goldsmith Design
paraglider Seed - KITE <em>Grow Your Skills</em> Bruce Goldsmith Design
paraglider Seed - KITE <em>Grow Your Skills</em> Bruce Goldsmith Design
paraglider Seed - KITE <em>Grow Your Skills</em> Bruce Goldsmith Design
paraglider Seed - KITE <em>Grow Your Skills</em> Bruce Goldsmith Design

Especificaciones

  14  
Factor de escala 0.78  
Superficie proyectada 11.91
Superficie plana 14.00
Peso sin bolsa 2.7 kg
Longitud suspentaje 194 m
Altura 5.2 m
Líneas por banda 3/4/3 A/B/C
Celdas 31  
Alargamiento 4.4  
Alargamiento proyectado 3.2  
Cuerda 2.24 m
Envergadura 7.94 m
Envergadura proyectada 6.30 m
Rango de pesos 30-120 kg
Velocidad a frenos libres 45 km/h
Velocidad máxima 45 km/h
Tasa de caída mínima 2.0 m/sec
Mejor planeo 5  
Homologación N.A.  

Objeto

Blown out? Grab a SEED and refine your skills! Ground handling is never a waste of time, even for professionals. You can learn essential skills that directly relate to in the air flying. Deflations, stalls, brake pressure and active piloting can all be practiced while kiting the SEED safely on the ground.

Descripción

The SEED is our affordable premier training paraglider, made for ground handling only. The SEED was developed from the EN-B EPIC, and acts and feels like a full-size paraglider. It is made from durable 50g cloth and has three risers. It’s a fun accessory for parawaiting at takeoff, practicing kiting, or just goofing around like Spiderman.

Notas del diseñador

I designed the SEED as simple as possible, while keeping the most essential and up-to-date designs features. A strong shark nose, CCB, 3D panel shaping on the lower surface and countless other features make the SEED feel like a normal paraglider. I always say, “good ground handlers make good pilots” so the SEED was produced to teach the most essential skills in a glider small enough to manage even in strong winds.

Materiales

Extradós : Dominico N40 50g/m²
Intradós : Dominico N40 50g/m²
Estructura interna : Dominico N30 Hard 42g/m²
Refuerzo de morro : Plastic wire 2,3mm and 2,7mm
Bandas : 13mm black Kevlar/nylon webbing
Poleas : NA
Líneas superiores : Liros DSL (Sheathed)
Líneas intermedias : Liros DSL (Sheathed)
Líneas inferiores : Edelrid (Sheathed)
Frenos : Liros DSL (Sheathed)

Color opciones



El embalaje incluye

  • Paraglider
  • BGD stickers
  • Stuff sack
  • Riser bag
  • Compression strap


Características de diseño

CCB Cord Cut Billow

La tecnología Cord Cut Billow ha sido desarrollada para mejorar la fricción de forma, estabilidad de la vela y rendimiento general de nuestros parapentes. Dos costuras corren en sentido de la cuerda a través de los paneles superiores del borde de ataque para acomodar el hinchamiento del panel que se produce cuando el ala está inflada. Se crean hasta cinco centímetros de exceso de material en los lados de un panel plano inflado al curvarse sobre un perfil de ala. La tecnología Cord Cut Billow absorbe el material con un panel 3D dando como resultado menos arrugas y una forma de perfil de costilla y estabilidad mejoradas.

Snap Lock

Snap Locks are lightweight compact attachments that effortlessly connect brakes to the risers with a small focused magnet inside the catch and an internal locking system that holds the handle in every direction except down toward the pilot. This unique design feature means the handles don’t fall off while kiting, packing, or performing maneuvers. The Snap Lock system solves many of the problems associated with press-studs and magnets that every pilot faces.

Panel 3D en el intradós

Intradós más limpio.

Sistema de tres elevadores

Sencillo y eficiente.

Copyright © 2014 Bruce Goldsmith Design
Sitio web Parapente FLYBGD por Experta Evolution