- Products
- Paragliders
- Cure
- Beat the Bug -
Alkaline
Enzyme
HalogenCure
EN/LTF-C
The remedy for patients who have progressed beyond the EN-B stage of treatment, and require a higher-performing cure for the flying bug.
Size
m²
| S | M | ML | L |
| 21 | 23 | 25 | 27 |
Specs
| S | M | ML | L | |
|---|---|---|---|---|
| Linear scaling factor | 0.96 | 1 | 1.04 | 1.08 |
| Projected area (m²) | 17.7 | 19.2 | 20.8 | 22.4 |
| Flat area (m²) | 21.2 | 23 | 24.9 | 26.9 |
| Glider weight (kg) | 4.2 | 4.6 | 5 | 5.4 |
| Total line length (m) | 225 | 244 | 264 | 285 |
| Height (m) | 7.1 | 7.6 | 7.9 | 8.2 |
| Number of main lines (A/B/C) | 3/3/4 | |||
| Cells | 60 | |||
| Flat aspect ratio | 6.8 | |||
| Projected aspect ratio | 4.9 | |||
| Root chord (m) | 2.2 | 2.3 | 2.4 | 2.5 |
| Flat span (m) | 12 | 12.5 | 13 | 13.5 |
| Projected span (m) | 9.3 | 9.7 | 10 | 10.4 |
| Trim speed (km/h) | 40 | |||
| Top speed (km/h) | 57 | |||
| Min sink (m/s) | 1 | |||
| Best glide | 11 | |||
| Weight range (kg) | 60-80 | 75-95 | 90-110 | 105-125 |
| Certification (EN/LTF) | C | |||
Info
From the ground up (literally) the EN-C CURE is a supercharged paraglider combining the perfect ratio between climbing efficiency and usable performance, guaranteed to cure even the worst cases of the “flying bug”.
Studies suggest that the EN-C CURE mutates into an extension of the patient’s mind and body as they speedily work towards their goals. Bruce Goldsmith handling has been added to maximize the quality of the experience.
INGREDIENTS: Trademark Cord Cut Billow, 54 leading edge mini-ribs, Strong shark, 60 enhanced cells, 6.75 flat aspect ratio, optimised micro-lines, 4.3-5.4kg weight, Bruce Goldsm¬ith handling, zesty artificial colouring.
Tech
Baby A-riser
We have added a 'big ears' A riser which is also on a ½ ratio with the rest of the A lines. This facilitates easy use of big ears while helping speed and stability while on bar. The speed system is light and simple without reflex really helping glide at speed.
Chord Cut Billow (CCB)
Chord Cut Billow technology has been developed to improve the form friction, glider stability and overall performance of our paragliders. Two seams run chord-wise across the top panels of the leading edge. They accommodate the panel ballooning that happens when the wing is inflated. Without CCB, up to five centimetres of excess material is created on the sides of an inflated flat panel when it bends over a wing profile. This results in wrinkles. Chord Cut Billow technology removes this excess material and the 3D panel has fewer ripples and improved rib profile shape and stability.
BGD Feedback
Gliders that talk are safer. Safer gliders make pilots perform better. Better performing pilots fly further. Further flying pilots are happier pilots. BGD Feedback produces happier pilots!
Leading edge mini-ribs
Situated along the leading edge are reinforced mini-ribs, designed to help produce a rock-solid profile while on speed bar.
Integrated Line Layout
The line layout of our gliders is fully integrated into the wing design. Sail and lines are designed together, holistically. The cell widths and the internal straps that transfer the load though the sail are all designed according to the line layout. Even the panel shaping is matched with the line layout through detailed CAD simulation. The result is simple: fewer lines and stronger, faster, safer gliders.
Progressive Stability
Using ALULA, BGD gliders are designed to have a stable and solid centre with progressively softer tips. This teaches pilots to predict and avoid deflations and stay aware of the air.
Snap Locks
Snap Locks are lightweight, compact attachments that connect the brakes to the risers. A small focused magnet inside the catch and an internal locking system hold the handle in place, releasing only if the handles are pulled down towards the pilot. This unique design feature means the handles don’t fall off while kiting, packing, or performing manoeuvres. The Snap Lock system solves many of the problems associated with press-studs and magnets.
Strong shark nose
An ultra aggressive shark nose optimises stability at all speeds. Not all sharks are created equal and BGD’s shark noses are very aggressive, maximising the effects of the technology.
Target
Are you finding it hard to stay up? Suffering from flight sweats, bomb-outs, or launch anxiety? Feel like you’re not making goal? There ARE treatment options. If you or someone you know has been experiencing some or all of these symptoms, maybe it is time to ask your dealer about the EN-C CURE. The “flying bug” has afflicted thousands of pilots around the world and is quickly becoming the leading cause of giant FAI triangles. Luckily, doctor Bruce Goldsmith has had a number of breakthroughs in developing the EN-C CURE. Clinical trials* have proven the CURE highly effective in climb, glide, speed, safety and handling. This remedy has been developed for patients who have progressed beyond the EN-A and EN-B stages and require a higher performance treatment.
Designer's notes
Its 3am and I can’t sleep. My mind is racing, non-stop. My wife, Arna, always says my best ideas come at night but I have to test high-G spirals tomorrow. Like a jolt, it happens. Reinforced leading edge mini-ribs combined with Cord Cut Billow would allow for an aggressive shark nose, minimal cells, and brilliant stable speed. I fall asleep in total bliss. The next morning a mix of rip-stop, plastic, and cloth create a rippled sticky mess across the leading edge of a prototype. Despite the homemade quality issues, the idea worked! A few prototypes later the CURE was born.
Out of the factory, the mini-ribs work better than I expected. It is the paraglider of my dreams (when I finally get to sleep). High performance, light design, exceptional handling, and impeccable safety all wrapped up into a neat colourful package. The EN-C CURE truly cures my craving.
Material
| Top surface | Dominico D30 42g/m² |
|---|---|
| Bottom surface | Porcher Skytex Classic II 27g/m² |
| Internal structure | Porcher Skytex hard finish 27g/m², 32g/m² |
| Nose reinforcing | Plastic wire 2,4mm |
| Risers | 13mm Kevlar / nylon webbing |
| Pulleys | Harken |
| Top lines | Edelrid Magix Pro Dry 8001U |
| Middle lines | Edelrid Magix Pro Dry 8001U |
| Lower lines | Edelrid Magix Pro Dry 8001U |
| Brakes | Liros DC |
Related Videos
Cure - EN-C - BEAT THE BUG
25-01-2017
Are you finding it hard to stay up? Suffering from flight sweats, bomb-outs, or launch anxiety? Feel like you’re not making goal? There ARE treatment options. If you or someone you know has been experiencing some or all of these symptoms, maybe it... More
Fassa - 2016
20-10-2016
Amazingly shot film with BGD team pilot/son Tyr Goldsmith flying over the Dolomites, Italy. More
In Search of the Cure
24-10-2016
A brilliant short film about a institutionalized person who finds the EN-C Cure. - Produced and Edited by Mae and Rody More
Kossen - 2017
20-05-2017
Bruce Goldsmith Designs view of the 2017 Super Paragliding Testival in Kossen, Austria. The event was a huge success, with four flyable days and gliders colouring the sky from dawn until dusk every day. BGD’s team were there with the whole range... More
Road Trip in Andaloucia
12-09-2016
Flying BGD, Rody takes to the open road and captures his view of Andaloucia, Spain during a stunning 10 minute film filled with eye candy. More
Stubai - 2017
15-01-2017
The 2017 Stubai Cup was a hoot! Perfect flying conditions with pilots climbing to over 3,000m and making brilliant XC flights all over the valley. At the stand we had hundreds of pilots trying our new products. This year we had the chance to meet... More
Stubai - 2018
15-01-2018
Stubai Cup 2018 we officially released our new high EN-B for demo. Our mission to put taste, control, and attitude back into gliders worked. Stubai gave us more amazing flying and we captured the money shots check out this video! More
Weightless - BGD's Serial Competition
18-07-2018
Pilots from all over the world competed in this one of a kind competition. More