- There and Back -
CORALCORAL
PINEPINE
SANDSAND

Echo 2

EN/LTF-B

A mischievous mountain nymph, the ECHO 2 is full of fun. It’s a lightweight EPIC 2 with the same lust for life, and a lighter spirit.

Size

XS S M ML L
21 23 25 27 29

Specs

  XS S M ML L
Linear scaling factor 0.92 0.96 1 1.04 1.08
Projected area (m²) 17.7 19.6 21 22.7 24.5
Flat area (m²) 21 23 25 27 29
Glider weight (kg) 3.4 3.6 3.9 4.1 4.4
Total line length (m) 227 233 244 254 263
Height (m) 6.4 7 7.1 7.3 7.5
Number of main lines (A/B/C) 3/4/3
Cells 45
Flat aspect ratio 5.2
Projected aspect ratio 3.6
Root chord (m) 2.5 2.6 2.7 2.8 3
Flat span (m) 10.4 10.9 11.4 11.8 12.3
Projected span (m) 8.2 8.5 8.9 9.3 9.6
Trim speed (km/h) 39
Top speed (km/h) 53
Min sink (m/s) 1
Best glide 9.5
Weight range (kg) 55-75 65-85 75-95 85-110 100-125
Certification (EN/LTF) B

Info

The ECHO is back, our lightweight low-B is perfect for pilots who like their paragliding served all ways. Hike-and-fly? Tick. It’s a kilo lighter than the EPIC 2, at 3.4kg in XS, and 4.4kg in L. It folds down nice and small with no fussy packing techniques required. Cross-country? Absolutely. It’s still a safe and easy low-B, with great glide performance and more speed than the original ECHO. You can safely use the bar all the way, and it has a B/C- steering system so you can get in your groove on bar, steer with the rears and munch those miles. Vol-biv? Please do! The sheathed lines, easy-handling risers and careful cloth choices mean ECHO 2 won’t wilt at the thought of a rocky launch. It’s easy to clear the lines to lay out in the wild, and the launch is really easy. So take her into the mountains, ECHO 2 is at home there!

The weights in the Specs table are with softlinks. The ECHO 2 is supplied as standard with maillons.

+ + + + + + + + + + +

Tech

ALULA Simulation Software

The future of glider design depends largely on simulations. Instead of designing and producing prototypes one by one, our unique in-house structural / aero simulation program, ALULA, enables us to accurately simulate hundreds of virtual prototypes. We test over 200 virtual prototypes for each paraglider, using 50 million iterations of the structural / aero calculations.

B/C Speed Steering

The risers are equipped with a new ‘speed riser’. It attaches the back of the speed system to front of the C-line steering handle. This balances the load on the C-steering handle, making the C-steering system simple and light to use. Because the force is on the dimensionally stable Kevlar-reInforced riser and not the pulley, the glider stays in trim.

BGD Feedback

Gliders that talk are safer. Safer gliders make pilots perform better. Better performing pilots fly further. Further flying pilots are happier pilots. BGD Feedback produces happier pilots!

Chord Cut Billow (CCB)

Chord Cut Billow technology has been developed to improve the form friction, glider stability and overall performance of our paragliders. Two seams run chord-wise across the top panels of the leading edge. They accommodate the panel ballooning that happens when the wing is inflated. Without CCB, up to five centimetres of excess material is created on the sides of an inflated flat panel when it bends over a wing profile. This results in wrinkles. Chord Cut Billow technology removes this excess material and the 3D panel has fewer ripples and improved rib profile shape and stability.

Low Weight and Pack size

We have used lightweight cloth, mostly Porcher 27g/m2, on both surfaces. The ribs and diagonals are all weight optimised, and there are no long or stiff rods in the sail, so the wing can be easily and compactly folded.

Multi-Plastics

By using different sizes of stiff black Perlon® and flexible orange plastic in specific places, we have optimised the rigidity and softness of the wing along the span to achieve optimal progressive stability.

Integrated Line Layout

The line layout of our gliders is fully integrated into the wing design. Sail and lines are designed together, holistically. The cell widths and the internal straps that transfer the load though the sail are all designed according to the line layout. Even the panel shaping is matched with the line layout through detailed CAD simulation. The result is simple: fewer lines and stronger, faster, safer gliders.

Progressive Stability

Using ALULA, BGD gliders are designed to have a stable and solid centre with progressively softer tips. This teaches pilots to predict and avoid deflations and stay aware of the air.

Snap Locks

Snap Locks are lightweight, compact attachments that connect the brakes to the risers. A small focused magnet inside the catch and an internal locking system hold the handle in place, releasing only if the handles are pulled down towards the pilot. This unique design feature means the handles don’t fall off while kiting, packing, or performing manoeuvres. The Snap Lock system solves many of the problems associated with press-studs and magnets.

Triple finger diagonals

Triple Finger Diagonals create a more solid and durable wing. Across the whole chord of the profile, three-piece diagonal supports pass through holes in the ribs. They ensure structural integrity by avoiding the cloth being loaded in the bias direction. This is particularly important near the trailing edge where the profile is thin and shallower diagonal ribs supporting high loads.

Weight-optimised ribs

We have maintained the strength and rigidity of the ribs while removing unnecessary material. This means less weight for no increase in cost or reduction in strength of the wing. The hole positioning and size depends on the loads taken locally by the sail, and it is thanks to recent developments in our software that it is now possible to accurately calculate this.

Target

ECHO 2 is a multi-purpose superstar, a quiver of one! Whether you’re a relative beginner or have 20 flying years under your belt, she’s safe and accessible, with fun handling and good performance. We found a solution to the lightness/durability paradox with clever cloth combos that mean she’s light but still durable, and easy to handle too. So whether you fly locally, hike, travel or vol-bivouac, the ECHO 2 is everything you need.


Designer's notes

With the ECHO 2 we wanted to make something nice and light, that is easy to fold and carry. At the same time, it had to be user-friendly, not too fragile and have really usable performance.

The ECHO 2 is made entirely from high quality and industry proven Porcher cloth, mostly in 27g/m2 weight for both surfaces. On the leading edge there is sturdy 38g/m2 cloth in the centre where it is needed for additional strength and to ensure longevity.

There are small rods in the leading edge, but none are very long, and there are no rods in the back of the sail so it’s easily foldable and can be packed small.

We opted for the same risers as are on the EPIC 2, because they are much easier to handle than Dyneema ‘rope’ style risers, and this wing is designed to be accessible to lower-airtime pilots. We also kept to sheathed lower lines for the same reason, especially for rocky or awkward launches. They are easier to see, so you can spot if they are caught around anything before you try to launch, and it means they can be colour coded so you can easily tell the lines apart.

We worked a LOT on perfecting the launch, and from the feedback we’re getting we reckon we got it right. The light sail comes up like a dream and settles over your head till you decide to go. No holding back or over-flying, and no hurtling forwards at high speed in strong winds. It’s easy and relaxing, just the way we like it!

While safety is always a priority with a low-B wing, the ECHO 2 included, we also wanted the ECHO 2 to have really usable performance. It is a bit faster than the original, and we’ve used a similar B/C steering system to that on the BASE 2, on the EPIC 2 and ECHO 2. You can safely explore the whole bar travel, and learn to correct your direction with the rear risers. There won’t be a lot of pitch-correction to manage with the ECHO 2, and rear-riser steering is a good method to get used to if you’re a newer pilot moving up through the glider levels. If you’d rather not use it yet, that’s fine. The way it’s designed it does not clutter the risers, and can be ignored until you’re ready.

Long brake travel helps avoid an accidental stall or spin, and the brakes are beautifully precise and direct. The handling is BGD through and through – playful and fun and the colours have crept onto the undersurface too for even more pzazz. (And as the pilot you get to see them too, bonus!)

Flying Level / Style

Package includes

Paraglider / Gift / Manual card / Stickers / Rucksack / Repair material / Stuff sack / Riser bag / Compression strap

Material

Top surface Porcher Skytex, Classic II 27g/m², 38g/m²
Bottom surface Porcher Skytex Classic II 27g/m²
Internal structure Porcher Skytex hard finish 32g/m²
Nose reinforcing Plastic wire 2,3 / 2,7mm
Risers 12mm Kevlar / Nylon webbing
Pulleys Allen
Top lines Edelrid Magix Pro Dry 8001U
Middle lines Edelrid Magix Pro Dry 8001U
Lower lines Edelrid PPSL and TSL
Brakes Liros DSL, PPSL

Related Videos

Echo 2

21-09-2022

The ECHO 2 is a multi-purpose superstar, a quiver of one with fun handling and good performance. Check out the official video! More

Echo 2 Tech

30-09-2022

With the ECHO 2 we wanted to make something nice and light, that is easy to fold and carry. Tom and the team talk through some of its technical features. More