Custom

About

Since 2016 we have been producing quality custom paragliders with cut-in and/or stuck-on logos. Cut-in logos are designed into the panels of the paraglider and sewn together during the construction. We recommend this method for larger logos, as the results are significantly better and this method avoids adding a lot of extra weight to the wing. However cut-in logos need to be generally larger than 5cm across so they are not suitable for small letters or numbers. For smaller logos or intricate or detailed artwork, we recommend using stuck-on logos. We use two types of cloth for stuck on logos, Porcher ripstop adhesive material which weighs 86 gsm but is only available in a small range of colours; or Insignia which is available in a wide variety of colours but is heavier at 130 gsm. Stuck-on logos should not cover more than 2.0 sqm to limit the extra weight added to 200g. We can also use a mixture of cut in and stuck on logos which works well. For best effect logos are either on the top or the bottom, but not normally on both surfaces. Please contact your local dealer if you are interested in a custom logo order. He or she will be able to assist you in determining the best solution for your paraglider, and will provide you with a quote.

Guidelines

• We can only accept expanded vectorised artwork (.ai, .eps, etc.). Logos in .jpeg, .png, etc. cannot be accepted.
• Place and position the logo on your wing using our downloadable design templates. Do not place the logo over the top surface CCB region (leading edge cuts).
• Cut-in and custom colour wings can only be made with our available colours.
• Unless otherwise specified, custom paragliders will retain the standard print markings: (centre logo, BGD logo and glider name logo).
• Delivery time is a minimum of 4-5 weeks after artwork confirmation and payment.